BCLZV - BOTTOMKOTE ANTIFOULING RED, 49

  • MSDS: BCLZV
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: BOTTOMKOTE ANTIFOULING RED, 49
  • National Stock Number: 8010-00N006128
Product Identification

Product ID:BOTTOMKOTE ANTIFOULING RED, 49
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006128
MSDS Number: BCLZV

Responsible Party
INTERNATIONAL PAINT CO., INC.
220 S LINDEN AVE
SOUTH SAN FRANCISCO, CA 94080-6411
US

Cage: 1M431

Contractor
INTERNATIONAL PAINT CO INC
SOUTH SAN FRANCISCO, CA 94080-6411 US

Cage: 1M431

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 6.45%

OSHA PEL 100 PPM


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 9.32%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 1.79%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


CUPROUS OXIDE;TLV IS FOR FUME

CAS: 1317-39-1

RTECS: GL8050000

ACGIH TLV: 0.1 MG/CUM, MFR

Hazards

Effects of Overexposure:INHAL:IRRIT OF RESP TRACT, HDCH, DIZZ. SKIN &
EYES:PRIMARY IRRIT.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR AWAY FROM EXPOSURE. EYES:FLUSH IMMED
W/COPIOUS QUANTITIES OF RUNNING WATER 15 MINS. CALL MD.SKIN:WASH
AFFECTED AREA W/WATER. REMOVE CONTAMINATED CLOTHING. WASH BEFORE
REUSE.

Fire Fighting

Flash Point:83F,28C CC
Lower Limits:0.77
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL TO SMOTHER THE FLAMES.
Fire Fighting Procedures:USE WATER TO COOL UNOPENED CNTNRS IN VICINITY.
Unusual Fire/Explosion Hazard:CONGAINS FLAMMABLE SOLVENTS. DO NOT USE
IN AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHAL OF VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT
MATL.

Handling

Handling and Storage Precautions:STOREIN BLDGS DESIGNED & PROTECTED FOR
STORAGE OF NFPA CLASS 1C FLAMMABLE LIQUIDS
Other Precautions:IF MATERIAL IS SUBJECTED TO EXCESSIVE HEAT SUCH AS
THAT PRODUCDED BY WELDIN OR FLAME CUTTING, IRRIT FUMES WILL BE
EMITTED & PRECAUTIONS SHOULD BE TAKEN TO AVOID INHAL OF THESE
VAPORS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD FOR EXPOS OF CONCERN.
Ventilation:GEN DLUT/LOC EXHST ADEQUATE TO KEEP LEVELS BELOW TLV & LEL.
Protective Gloves:REQD:LONG EXPOS
Eye Protection:SFTY GLASS W/SPLASH GUARD
Other Protective Equipment:AS NEEDED TO PRVNT PROLONGED SKIN CNTCT
W/CONTAIM CLTHNG.
Supplemental Safety and Health
BP:138-204C. VAP PRESS:2.0 FOR MINERAL SPIRITS TO 44.0 FOR ETHANOL.
WEIGHT PER GALLON:14.84 LBS.

Chemical Properties

Boiling Pt:B.P. Text:281-400F
Vapor Density:>1.0
Evaporation Rate & Reference:<1.0, ETHER
Appearance and Odor:FLAMMABLE LIQUID PAINT
Percent Volatiles by Volume:37.9

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2, CU FUME

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL,STATE & FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.